Case CX300C, Руководство оператора

Страница: 168 / 288

4 - OPERATING INSTRUCTIONS
Changing the flow patterns
NOTE: To prevent failure or damage to the tool, make
sure that you select the correct circuit configuration and
flow rate for the tool.
1. Operate the switch (1) located on the front right-hand
switch panel to display the flow pattern to be changed.
Every time the switch
(1) is pressed, one of the differ-
ent types of flow patterns recorded for the pump can
be selected.
VOHLGR-002
30
2. The recorded value can be identified by the number
shown on the screen, e.g.:
(1) = value 1 in the table.
(2) = value 2 in the table.
(3) = value 3 in the table.
3RW3PD-004Z
31
3. Operate the windshield wiper switch (1) to show the
previous pattern.
Operate the auto idling switch
(2) to show the following
pattern.
4. Operate the travel speed switch (3) to record.
3RW3PD-004C
32
4-38