Carbide 3D Shapeoko HDZ 4.0, Инструкция по сборке

Страница: 38 / 62

support@carbide3d.com docs.carbide3d.com
8/31/2020 Version 4.0
38
Cable Cleanup — Post-Dec 2019 Rails ONLY
HDZ Kit:
Item Description Qty
UU Cable Tie Mounts 5
VV M4 × 6mm Button Head Cap Screw 5
WW Cable Ties Several
1. Install cable tie mounts to the back of the X-rail.
See
Fig. 40 .
a. Remove the four self-adhesive cable tie
mounts from the rear of the X-rail.
b. Cable tie mounts install vertically.
c. Install the five (5) mounts to the upper five
M4 threaded screw holes along the middle
of the rail.
d. Use a 3mm hex key and one (1) M4 × 6mm
BHCS to secure each mount.
2. Tidy up the cables along the rear of the X-rail. See
Fig. 40 .
a. Secure loose cables to the cable tie
mounts using cable ties.
Figure 40
Shapeoko 3 Machines: You will only use four (4) cable tie mounts and four (4) M4×6mm BHCS.