Carbide 3D Shapeoko HDZ 4.0, Инструкция по сборке

Страница: 33 / 62

support@carbide3d.com docs.carbide3d.com
8/31/2020 Version 4.0
33
Install the Y-Axis Proximity Switch
HDZ Kit:
Item Description Qty
Q Y-Axis Proximity Switch (2540mm XXL, 2200mm XL, 610mm Shapeoko 3) 1
W Y-Axis Proximity Switch Mount 1
X M5 × 35mm Socket Head Cap Screw 2
Y M3 × 18mm Socket Head Cap Screw 2
1. Install the Y-Axis proximity switch mount to the
outside of the Y2-carriage. See
Fig. 34 .
a. Use a 4mm hex key and two (2) M5 × 35mm
SHCS to secure the mount to the outside
of the Y2-carriage.
2. Attach Y-Axis proximity switch to the mount. See
Fig. 34 .
a. Locate the Y-Axis proximity switch exiting
the drag chain at the Y1-Axis head bracket.
b. Position the proximity switch with the red
LED facing out and the target pointing to
the rear.
c. Align the switch’s two mounting slots with
the two M3 PEM nuts on the mount.
d. Use a 2.5mm hex key and two (2) M3 × 18mm SHCS to secure.
e. Before fully tightening the screws, slide the switch as far to the FRONT as it will go.
Figure 34