docs.carbide3d.com
8/31/2020
Version 4.0
22
1.
Attach one (1) middle support plate and one (1)
tail support plate onto the X-rail. See
Fig. 20
(image from rear).
a.
Measure and mark 5
” and 19 ½” from
the
Y1-carriage.
b.
Clean the rail, on the far side (Y2-side) of
each mark, with an alcohol wipe.
c.
Stick the middle support plate (no PEM
nut) to the top of the rail, to the far side
of
the 19 ½” mark
.
d.
Stick the tail support plate (with PEM nut)
to far side of
the 5” mark. Orient the plate
with the PEM nut overhanging and toward
the Y1-side of the rail.
e.
Press each plate firmly to the rail for 30 seconds.
2.
Attach one (1) middle support plate and one (1) tail support plate onto the Y1-rail. See
Fig. 20
.
a.
Measure and mark 7 ½” and 16 ½” from the front endplate.
b.
Clean the rail, on the far side (rear-endplate-side) of each mark, with an alcohol wipe.
c.
Stick the middle support plate (no PEM nut) to the top of the rail, to the far side of
the 7 ½” mark
.
d.
Stick the tail support plate (with PEM nut) to the far side of
the 16 ½” mark. Orient the plate with the
PEM nut overhanging and toward the front endplate.
e.
Press each plate firmly to the rail for 30 seconds.
Figure 20
Содержание Shapeoko HDZ 4.0
Страница 1: ...support carbide3d com docs carbide3d com 9 2 2020 Version 4 0 1 ASSEMBLY GUIDE HDZ 4 0...
Страница 2: ...support carbide3d com docs carbide3d com 9 2 2020 Version 4 0 2...
Страница 8: ...support carbide3d com docs carbide3d com 8 31 2020 Version 4 0 8 Figure 2...
Страница 42: ...support carbide3d com docs carbide3d com 8 31 2020 Version 4 0 42 Figure 2...
