Carbide 3D Shapeoko HDZ 4.0, Инструкция по сборке

Страница: 30 / 62

support@carbide3d.com docs.carbide3d.com
8/31/2020 Version 4.0
30
Install the Drag Chain
Install the Drag Chain to the X- and Y1-Rails
HDZ Kit:
Item Description Qty
II M3
×
6mm Flat Head Screw 3
PP M3
×
6mm Flat Head Screw 3
1. Move the X-rail to the back of the machine.
2. Lay the drag chain on the rails. See Fig. 31 .
a. First, place the three cables not threaded
through the X-Axis drag chain (the Y-Axis
proximity switch cable and the Y1- and
Y2-motor leads) over and behind the
X-rail
b. Second, lift the drag chain and place it
across the Y1- and X-rails.
c. Lay the drag chains so that the tail of the
Y-Axis drag chain will curl under and the
head of the X-Axis drag chain will curl up.
Figure 31
Shapeoko 3 Machines:
Skip ahead to the “Install the Proximity Switches” section on page 32.