docs.carbide3d.com
8/31/2020
Version 4.0
31
3.
Secure the drag chain to the rails. See
Fig. 32
.
a.
Secure the head of the Y-Axis drag chain
to the head bracket on the outside of the
Y1-carriage.
i.
Use a 2mm hex key and two (2)
M3
×
6mm FHS to secure.
b.
Secure the tail of the Y-Axis drag chain to
the tail bracket (or tail plate) next to the
Carbide Motion Board enclosure.
i.
Curl the tail of the drag chain
under and toward the enclosure.
ii.
Use a 2mm hex key and one (1)
M3
×
6mm FHS to secure.
c.
Secure the tail of the X-Axis drag chain to
the tail bracket (or tail plate) near the Y1-motor.
i.
Use a 2mm hex key and one (1) M3
×
6mm FHS to secure.
d.
Secure the head of the X-Axis drag chain to the head bracket on the rear of the Z-Plus.
i.
Curl the head of the drag chain up and toward the Z-Plus.
ii.
Use a 2mm hex key and two (2) M3
×
6mm FHS to secure.
Figure 32
Содержание Shapeoko HDZ 4.0
Страница 1: ...support carbide3d com docs carbide3d com 9 2 2020 Version 4 0 1 ASSEMBLY GUIDE HDZ 4 0...
Страница 2: ...support carbide3d com docs carbide3d com 9 2 2020 Version 4 0 2...
Страница 8: ...support carbide3d com docs carbide3d com 8 31 2020 Version 4 0 8 Figure 2...
Страница 42: ...support carbide3d com docs carbide3d com 8 31 2020 Version 4 0 42 Figure 2...
