Cantek KQ0824 Series, Руководство пользователя

Страница: 59 / 215

59

Click No Beep

to deactivate alert sounds from video loss. Apply to all channels.
 Choose ‘OK’ to confirm the setting.
4.6.4 System Event

Please click (

) LINK>System Event and the following screen will appear.

Select recording cameras and alarm outputs while Emergency recording using EMERGENCY key and set E-mail addresses
for notification.

Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.

Please follow the setup procedures below.
①
System Event frame displays Emergency, which user does not have to change.
②
Select cameras for recording when emergency occurs. Please check

a check box under Link Camera. More than two
cameras can be set.
③
Select alarm outputs to be worked when emergency occurs. Please check

a check box under Link Alarm Out. More
than two alarm outputs can be set.
④
Select E-mail addresses for notification when emergency occurs. Please check

a check box under Link Notification.
More than two E-mail addresses can be set.
 Choose ‘OK’ to confirm the setting.
4.6.5 Popup Link

Please click (

) LINK>Popup Link and the following screen will appear.

When Motion or Alarm-In is detected, user can select a popup or beep sound for warning, or have a particular channel of
interest to pop-up on Spot Screen.

Please follow the setup procedures below.
①
Select camera
②
Popup : Please Check

a check box under making the popup screen for main monitor.
③
Beep : Please Check

a check box under making beep sound.
④
Spot : Please Check

a check box under making the popup screen for spot monitor.

Click Copy to All Cameras button, then the present channel setup will apply to all other cameras.
 Choose ‘OK’ to confirm the setting.