Cantek KQ0824 Series, Руководство пользователя

Страница: 193 / 215

193
-
PIP : turn on/off PIP screen in case of 1 channel screen. If PIP function is on, user number key(s) + ENT key to change
the PIP channel. In case of 4 or 9 channel screen, it changes the screen to a next one in the sequence.
-
FREEZ : freeze a current image.
-
SETUP : pop up Setup window.
-
PLAY/PAUSE : play/pause recorded data in play mode.
-
SEARCH : pop up Search window, or switches play mode to search mode.
-
ZOOM : zoom in a current image.
-
JOYSTICK (REW) : rewind in sequence of 2X, 4X, 8X, 16X, 32X, 62X, Extreme in play mode.
-
JOYSTICK (FF) : fast forward in sequence of 2X, 4X, 8X, 16X, 32X, 62X, Extreme in play mode.
-
JOYSTICK (SETUP) : operate with direction keys if Setup window is popped up. (up/down/left/right).
-
ENT : view a channel in full screen (by selecting a number with ENTER button).
12.4.3 PTZ Control Mode

Push once to exit DVR mode and turn PTZ mode.
 Press number keys + “ENT”(Hold for a while until double beep sounds) key to change to Camera ID that wish to control. If
there is a corresponding Camera ID, a full camera image will show up and PTZ control is possible.

It is able to control 255 devices.

CP1200A has only 3 RS485 ports that DVR can be connected. If user wants to connect more than 3 devices on CP1200A,
user should use RS485 multi port.(RS485 multi port is not included in CP1200A)

PSET :
-
Preset save : Number keys + PSET (Hold for a while until double beep sounds).
-
Preset shift : Number keys + PSET

TELE : Zoom Out

WIDE : Zoom In
NOTE

When a Key does not Work after Set up
-
If the communication speed of DVR and CP are not co-related, it may not work. Please make sure the Baud rate of Keyboard sets on
9.6kbps.
-
Press the button to enter PTZ mode and switch to DVR mode again.
-
Please reboot the DVR.

When Tx Blinks Continually on the LED Window
-
If Tx blinks continually without any operation, it may be mistakenly set up for Joystick.
-
OFFSET of the Joystick may not appropriately set up.
-
Please touch the Joystick and position it on the center.