Canon XF205, Инструкция по эксплуатации

Страница: 60 / 246

Shutter Speed
60
Manual Shutter
When the shutter speed mode is set to manual, you can select to adjust the shutter as a shutter speed, angle
value, clear scan frequency or slow shutter speed according to your shooting needs.
Changing the Shutter Speed Mode and Value
1 Set the SHUTTER switch to ON.
2 Open the shutter [Manual] submenu.
[
~
Camera Setup]
>
[Shutter]
>
[Manual]
3 Select the desired mode and then press SET.
• If you selected [Speed] (the default value), you can
select the increment scale to use when adjusting the
shutter speed; otherwise, skip to step 6.
4 Open the [Shutter Increment] submenu.
[
~
Camera Setup]
>
[Shutter]
>
[Shutter Increment]
5 Select [Normal] or [Fine] and then press SET.
• If you select [Fine], you can adjust the shutter speed in
increments of up to 1/256 step.
6 Close the menu and change the shutter speed
mode to manual using the direct setting mode.
• Press SET and push the joystick left/right until the shutter speed mode
icon is highlighted in orange, select the icon and press SET. For
details refer to
Using the Direct Setting Mode (
A
57).
7 Adjust the shutter speed, angle value or clear scan frequency
using the direct setting mode.
• Press SET and push the joystick left/right until the shutter value is
highlighted in orange, select the desired value and then press SET. For
details refer to
Using the Direct Setting Mode
(
A
57).
• If in step 3 you selected [Clear Scan], adjust the frequency so that
black bands do not appear on the screen.
NOTES
• If you set an assignable button to [Shutter Increment] (
A
129), you can
press the button to change the shutter increment (steps 4-5).
Additionally, if you set an assignable button to [Shutter Mode], you can
press the button to change the shutter speed mode between manual
and automatic (step 6).
Remote Operation Using Browser Remote
After completing the necessary preparations (
A
182), you can adjust the shutter speed remotely from a
connected device using the Browser Remote application.
1 Press the shutter speed mode button on the Browser Remote screen.
2 Select the desired mode.
3 Press the current shutter speed, angle value or clear scan frequency and select the desired value
from the list.
• You may need to scroll up/down to see all the available values.
• The selected value will be displayed on the Browser Remote screen and will be applied on the camcorder.
[
~
Camera Setup]
[Shutter]
[Manual]
[Speed]
[
~
Camera Setup]
[Shutter]
[Shutter Increment]
[Normal]
COP
Y