Canon XF205, Инструкция по эксплуатации

Страница: 119 / 246

119
Special Recording Modes
Eng
lis
h
• The front and rear tally lamps go out and [INT STBY] appears at the top of the screen (with [INT] flashing).
NOTES
• You can use only one special recording mode at a time.
• The interval and the number of frames recorded cannot be changed while recording.
• Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
• Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be
deactivated also if you change the movie format or video configuration.
• During this special recording mode, the time code’s running mode (
A
90) can be set to [Rec Run] or [Regen.]
and the time code advances by the number of frames recorded. If the time code’s running mode is set to [Free
Run] or the time code is input from an external source, the running mode will switch to [Rec Run] during
special recording mode. When the special recording mode is deactivated, the running mode will return to its
previous setting.
• During special recording mode, the time code signal will not be output from the TIME CODE terminal,
3G/HD-SDI terminal or MON. terminal.
Frame Recording Mode
Set the number of frames in advance. We recommend operating the camcorder remotely or stabilizing the
camcorder, for example, on a tripod. Sound is not recorded in this special recording mode.
Configuring Frame Recording Mode
1 Open the [Recorded Frames] submenu.
[
w
Other Functions]
>
[Frame Recording]
>
[Recorded Frames]
2 Select the desired number of frames and then press SET.
• Available options depend on the frame rate used: 1, 3, 6 or 9 (23.98P,
29.97P, 59.94i), or 2, 6 or 12 (59.94P).
Activating Frame Recording Mode and Recording
1 Open the [Special Recording] submenu.
[
w
Other Functions]
>
[Special Recording]
2 Select [Frame Recording] and then press SET.
• [FRM STBY] appears at the top of the screen (with [FRM] flashing).
3 Press the START/STOP button to begin recording.
• The camcorder automatically records the set number of frames.
• The front and rear tally lamps illuminate.
• [FRM STBY] changes to [
Ü
FRM REC] while recording frames and [
Ü
FRM STBY] when frames are not
being recorded.
• Repeat until you finish recording.
4 Open the [Special Recording] submenu.
[
w
Other Functions]
>
[Special Recording]
5 Select [Off] and then press SET.
• Frame recording mode ends and all of the recorded frames are joined together into one clip.
• The tally lamps go out and [STBY] appears at the top of the screen.
Operating modes:
[
w
Other Functions]
[
Frame Recording]
[Recorded Frames]
[1]
[
w
Other Functions]
[
Special Recording]
[Off]
COP
Y