Canon PIXM MX300 Series, Руководство пользователя

Страница: 172 / 222

staining or scratching the surface.
(2)
Roll up the paper in a direction opposite to paper
curl as seen below.
(3)
Check to see that the paper curl is within
approximately 0.08 to 0.2 inches / 2 to 5 mm
(B)
in
height.
We recommend printing curl-corrected paper one sheet
at a time.
Note
Depending on the media type, the paper may be
smudged or may not be fed properly even if it is not
curled.
In such case, follow the procedure described above in
"For Other Paper" to curl the paper before printing.
This may improve the print result.
Inappropriate
Paper
Thickness
Lever setting.
Adjust the position of the Paper Thickness Lever
according to the type of paper you are printing on.
See
Compatible Media Types .
Depending on the printing content, the printing surface
may become scratched even for the types of paper to set
the lever to the left. In this case, set the Paper Thickness
Lever to the right.
* Reset the Paper Thickness Lever to the left when you
finish printing. If the lever is not set back to the left, the
inside of the machine is more likely to get dirty due to the
wider clearance between the print head and the loaded
paper. It may also reduce print quality.
Note
If the corners or edges of the paper are smudged, try to
print with the Paper Thickness Lever set to the right.
172