Canon MultiPASS C50, Руководство пользователя

Страница: 228 / 305

8-32
Troubleshooting Chapter 8
DOC. TOO LONG
(
Continued)
DOCUMENT READY
ECM RX
ECM TX
HANG UP PHONE
INSTALL BC-21
INSTALL BC-21/20
LOAD PAPER
—
—
—
—
—
—
—
It took more than 32
minutes to receive a
document.
The document is longer
than 1 metre.
The document in the
Automatic Document
Feeder (ADF) is ready
for scanning.
The MultiPASS C50 is
receiving a fax using
ECM.
The MultiPASS C50 is
sending a fax using
ECM.
The handset is off its
hook.
The BX-20, BC-22/22e,
or BC-29F BJ cartridge is
installed.
The BC-22/22e or
BC-29F Cartridge is
installed, so the
MultiPASS C50 cannot
print any received faxes,
or make copies.
The MultiPASS C50 is
out of recording paper.
Contact the sender, and
have them divide the
document and send each
part separately.
Use a copy machine to
copy each page of the
document and send the
copy.
Send the fax, scan the
document, or make a
copy.
Faxes can take longer to
receive when using
ECM. Try turning ECM
off if you need to receive
quickly, or if you know
your local telephone lines
are in good condition.
Faxes can take longer to
send when using ECM.
Try turning ECM off if
you need to send quickly,
or if you know your local
telephone lines are in
good condition.
Place the handset
properly onto its hook.
Remove the BX-20,
BC-22/22e, or BC-29F BJ
cartridge and install the
BC-21/21e BJ cartridge.
Remove the BC-22/22e or
BC-29F Cartridge and
install the BC-21/21e or
BX-20 BJ Cartridge.
Add paper to the sheet
feeder. Make sure the
stack is below the limit
mark (
D
). Then press
the (STOP) button.
Message Error Code Cause Action