Canon CXDI-1, Руководство по эксплуатации

Страница: 132 / 170

11. Questions and Answers
– 124 –
11.2 Entering/Changing Data
Q2-1
There are exposure parameters that are not displayed on the exposure screen.
A2-1
You can select the exposure parameters to be displayed from the SYSTEM SETUP screen (
→
Setup
Guide) .
Parameters set to off are not displayed.
Q2-2
Do you have to enter all the data on a patient?
A2-2
An error occurs if any of the required fields (
→
Setup Guide) are not completed.
The required fields can be selected.
Q2-3
How can patient data be changed after input?
A2-3
Touch [PATIENT] . Now the data can be changed. The [OK] at the bottom right of the software keyboard
changes to [CHANGE] . To exit, touch [CHANGE] .
Q2-4
How can exposure parameters be changed on the category type screen?
A2-4
Unlike the tray type screen, they cannot be changed directly from the category type screen. Touch
[CHANGE] to display the screen for changing parameters.
Q2-5
Although the exposure parameters have been changed, they returned to the previous settings
after an exposure was performed.
A2-5
Unless you touch [SAVE PARAM] and save the parameters after changing them (
→
page 18) , the changed
parameters will return to the previous settings after an exposure has been taken.
Q2-6
There is a parameter that cannot be changed during the exposure operation.
A2-6
For msec and mAs , only the one that has been selected on the SYSTEM SETUP screen can be changed.
Selection can be made in the Exposure Condition Display (
→
Setup Guide) .
Q2-7
Exposure parameters cannot be changed freely.
A2-7
If [ENABLE] has been selected for PARAMETER TABLE (
→
Setup Guide) on the SYSTEM SETUP
screen, only the preset values in the exposure parameter table will be displayed. Setting to [DISABLE]
allows setting of any user-selected value.