Canon CXDI-1, Руководство по эксплуатации

Страница: 128 / 170

10. Before Calling a Service Engineer
– 120 –
-504
DICOM Parameter Error • Touch [RETRY] .
• Touch [CANCEL] to close the window, and
then see Setup Guide and set the
parameters.
DICOM transfer Parameter is wrong.
-505
DICOM Response Error • Check that the printer or storage medium is
normal. Then touch [RETRY] .
• Touch [CANCEL] to close the window and
then check the settings.
Receiving device reported an error in DICOM response. Check receiving
device.
-507
DICOM Printer Status Error
• After eliminating the printer error, touch
[RETRY] .
• Touch [CANCEL] to cancel output.
CXDI has aborted DICOM transmission because of a FAILURE in DICOM
printer status. Check receiving device.
-509
External Storage Error
• Replace the disk with a writable disk and
touch [RETRY] .
• Touch [CANCEL] to cancel save.
• Contact the system administrator.
Selected directory or disk for storage can only be read.
-510
External Storage Error
Selected directory or disk for storage does not exist. Or image cannot be saved
on external storage, because the external storage or directory is not properly
set.
-512
External Storage Error
Cannot recognize the external storage. Set the disk properly and retry.
-514
External Storage Error
The exposed images cannot be stored because the size of folder partition is
smaller than the exposed images. Use a new disk, erase the folder contents or
enlarge the folder size and retry.
-515
Internal Storage Error
Touch
[OK]
to close the window, and then see
1.2 Shutting Down the CXDI ( → page 5)
,
and turn off the CXDI.
When these errors occur, note the error code
and contact a Canon representative or
distributor.
Selected directory for storage can only be read.
-516
Internal Storage Error
Selected directory for storage does not exist, or attribution is incorrect.
-517
Internal Storage Error
Touch [RETRY] after the green mark
disappears from the message area of the
exposure screen.
Exposed image cannot be stored, because the capacity of internal storage
memory is insufficient.
-518
Internal Storage Error
• Touch [RETRY] to store the image on the
internal storage again.
• To cancel saving, touch [CANCEL] .
Exposed image cannot be stored, because the capacity of internal storage
memory is insufficient.
-519
External Storage Error
• Replace the disk with a writable disk and
touch
[RETRY]
.
• Touch [CANCEL] to cancel save.
• Contact the system administrator.
Capacity of external storage memory is insufficient. Retry after making a space
in the disk.
-520
Internal Storage Error
• Touch [RETRY] to store the image on the
internal storage again.
• To cancel save, touch [CANCEL] .
Exposed image cannot be stored, because the capacity of internal storage
memory is insufficient.
-528
DICOM Storage Commitment Warning
Touch [OK] to close the window.
Processing has not been performed, although parameters of commitment have
been specified. Check the execution path of commitment.
Error
Code
Error Message (Upper box: Error type
Lower box: Error description)
Remedy