Canon ColorPASS-GX400, Инструкция по установке и обслуживанию

Страница: 72 / 149

S
ERVICE
P
ROCEDURES
72
T
O TRANSFER OPTIONS TO THE NEW MOTHERBOARD
N
OTE
: This procedure assumes that the ColorPASS is fully assembled, verified in Service
Mode (see page 70 ), and powered off.
1 Make sure that the one-time use dongle is firmly attached to a USB port on the ColorPASS
and that no other dongles (such as for SeeQuence Impose or Compose) or USB storage
devices (except for the keyboard and mouse, if present) are attached to the ColorPASS.
The options transfer process may fail if other dongles and/or USB storage devices are
connected to the ColorPASS during the process.
2 Power on the ColorPASS.
3 Immediately insert the Fiery Options Utility DVD into the DVD drive.
N
OTE
: The Fiery Options Utility DVD must be in the DVD drive in time for the ColorPASS
to boot from it. If the ColorPASS does not boot from the Fiery Options Utility DVD, allow
the ColorPASS to start up, eject the DVD, turn off the ColorPASS, and then repeat steps 2
and 3.
N
OTE
: If an error message displays, see page 75 .
4 To continue, choose the Control Panel or monitor (if present) as the interface to use
throughout the option transfer process.
The first screen that displays when you start the Fiery Options Utility allows you to choose
the interface that you will use throughout the procedure. Choose an interface by selecting OK
on the Control Panel or monitor. The interface not chosen is then disabled during the option
transfer process.
Control Panel Monitor
Press OK to
continue
Options Utility
OK
Fiery Options Utility
To cont i nue runn i ng the F i ery
Opt i ons Ut i l i ty us i ng the mon i tor,
keybo a rd a nd mouse, press Enter
or cl i ck OK. To cont i nue runn i ng
the F i ery Opt i ons Ut i l i ty us i ng the
F i ery Control P a nel i nste a d, press
OK on the F i ery Control P a nel.
OK