Canon ColorPASS-GX400, Инструкция по установке и обслуживанию

Страница: 124 / 149

T
ROUBLESHOOTING
124
Startup (continued)
Control Panel screen and
Activity light appear as
follows: Possibly one of the following:
• Wrong, missing, incorrectly connected,
or faulty DIMM(s)
• Faulty motherboard
1. Recheck all cables and connections.
2. Reboot the ColorPASS.
3. If the problem persists, verify that the DIMMs are installed
as described in the DIMM section on page 76 . DIMMs must
be installed in matching pairs in alternating sockets. Check
for incorrect type, wrong capacity, missing, or faulty
DIMM(s). Reseat the DIMM(s) to remove any oxidation on
the connector (see
page 76 ).
4. If the problem persists, you may need to replace the
motherboard (see page 60 ).
Control Panel screen and
Activity light appear as
follows: Possibly one of the following:
• Faulty disk in the DVD drive
• Faulty motherboard
1. Reboot the ColorPASS.
2. If the problem occurs when you are installing software from
bootable media (DVD or CD), the media may be damaged.
Try another DVD or CD.
3. If the problem persists, replace the motherboard (see
page 60 ).
T
ABLE
3:
ColorPASS error messages and condition (Continued)
Symptom Possible cause Suggested action
Activity light status:
Off, then solid red.
S T A R T I N G U P. . .
Activity light status:
Blinking orange,
then solid red.