Canon ColorPASS-GX400, Инструкция по установке и обслуживанию

Страница: 51 / 149

S
ERVICE
P
ROCEDURES
51
Opening the ColorPASS
To service internal components, open the ColorPASS as described in the following procedure.
Never lift the ColorPASS by grasping the top panel. The top panel does not support the
weight of the system.
A
VERTISSEMENT
: Ne jamais soulever le serveur d'impression par sa partie supérieure : celle-ci ne peut pas supporter le
poids du système.
A
VVERTENZA
: Il server di stampa non deve essere mai sollevato afferrandolo dal pannello superiore, in quanto
quest'ultimo non può sostenere il peso dell'intero sistema.
W
ARNUNG
: Heben Sie den Druckserver nicht an der oberen Gehäuseabdeckung an. Die obere Gehäuseabdeckung ist
nicht dafür ausgelegt, das Gesamtgewicht des Systems zu tragen.
A
DVERTENCIA
: No levante nunca el servidor de impresión agarrándolo por el panel superior. El panel superior no
soporta el peso del sistema.
A
VISO
: Nunca erga o servidor de impressão pelo painel superior. O painel superior não suporta o peso do sistema.
W
AARSCHUWING
: Til de afdrukserver nooit op door het bovenpaneel vast te nemen. Het bovenpaneel kan het gewicht
van het systeem niet dragen.
T
O OPEN THE
C
OLOR
PASS
1 Shut down the ColorPASS (see page 48 ).
2 Remove all cables from the back of the ColorPASS.
3 If the ColorPASS is mounted on the optional furniture, and the optional monitor is attached,
perform the disassembly instructions in “Servicing the ColorPASS with furniture” on
page 134 .
4 Remove all panels necessary to access the component that you need to service.
For guidelines on which panels to remove, see the service procedure for the component that
you want to access.
N
OTE
:
When removing multiple panels from the ColorPASS, use the following order:
• Left panel (see page 52 )
• Right panel (see page 52 )
• Front panel (see page 53 )
• Top panel (see page 54 )
N
OTE
: When replacing panels, reverse the order.
5 Place the ColorPASS on a flat surface. Attach an ESD wrist strap before handling internal parts
(see “Precautions” on page 14 ).
6 Carefully position the ColorPASS so that it is resting on its side and the internal components
are facing up.
Place removed components on a grounded, antistatic surface.