Canon 6160, Руководство по эксплуатации

Страница: 40 / 222

Values and effects of the settings
The following table describes the effects of the various values of the settings.
Values and effects of the settings
Setting Values Effect
[Destination of
print job] [Scheduled jobs] The jobs are immediately sent to the list of [Scheduled
jobs]. The machine will print the jobs in the ripped order.
You can do the following to rearrange the order in which
the jobs will be printed.
• Move jobs to the list of [Waiting jobs] or
• Use [To top] to move a job to the top of the list of
[Scheduled jobs] (
Give priority to a scheduled job on
page 112 ).
[Waiting jobs] You can manually define the order in which the jobs will
be printed.
[As in job] The submitted jobs go to the destination that is indica-
ted in the job ticket.
[Check first set] [On] The machine goes on hold after the first set of a job is
printed. You can check the quality and layout of the first
set before the machine prints the remaining sets.
[Off] The machine will print the whole job without stopping
after the first set.
[As in job] The machine will print the jobs as indicated in the job
ticket.
[Confirm start of
job] [On] The machine always stops before the next scheduled
job. You must press the Release key to start each job.
[Off] The machine prints the scheduled jobs one after the oth-
er. The machine does not stop before the next scheduled
job, unless there is a reason to stop. For example when
a media is not available.
[On conflict] The machine stops before a job when one or more set-
tings are overruled by the controller.
[Next output tray] [After each job] Each job is sent to the next available output tray. In this
context, the second stack of the stacker is also defined
as an output tray.
[When tray is full] All the jobs are stacked until an output tray is full. When
an output tray is full, the next jobs are sent to the next
output tray.
4
Work with the workflow profiles
40 Chapter 5 - Adapt printer settings to your needs