![background image](http://html.mh-extra.com/html/candk-systems/236e/236e_installation-instructions-manual_478090010.webp)
System 236E Installation Instructions
10
Command Location 00: Installer Combination
0 0
0
1
2
3
4
5
(1) (2) (3) (4) (5) (6)
Default Values
Digit Positions (1) - (6): Installer Combination
Combination must have 6 digits. Valid entries are 0 - 9.
Command Locations 01 - 06: User Arming Combination (PIN)
1
2
3
4
(1) (2) (3) (4)
01 = User #1 (Master)
02 = User #2
03 = User #3
04 = User #4
05 = User #5
06 = User #6
0 1
Digit Position (1) - (4): Arming Combination
Combination must have 4 digits. Valid entries are 0 - 9.
0 7
0
0
0
0
0
0
(1) (2) (3) (4) (5) (6)
Default Values
Digit Position (1): User #1 O/C Report Enable
Digit Position (2): User #2 O/C Report Enable
0 = No Opening and No Closing Reports
1 = Opening and Closing Reports
0 = No Opening and No Closing Reports
1 = Opening and Closing Reports
Digit Position (3): User #3 O/C Report Enable
0 = No Opening and No Closing Reports
1 = Opening and Closing Reports
Digit Position (4): User #4 O/C Report Enable
0 = No Opening and No Closing Reports
1 = Opening and Closing Reports
Digit Position (5): User #5 O/C Report Enable
0 = No Opening and No Closing Reports
1 = Opening and Closing Reports
Digit Position (6): User #6 O/C Report Enable
0 = No Opening and No Closing Reports
1 = Opening and Closing Reports
Default Values
(User #1 shown)
CL 00 - 07
Command Location 07: User Opening/Closing Report Enable
Master Combination can be used to change other combinations.
To delete a PIN, enter 0 0 0 0.
NOTE:
If sending Opening/Closing Reports to a Pager, CL
26 must also be programmed for reporting.