System 236E Installation Instructions
18
Digit Position (1): Loop 1 Alarm Report Code
CL 1B and 1C
Command Location 1B: Panel Timing
1 B
2
3
2
1
0
0
(1) (2) (3) (4) (5) (6)
Default Values
Digit Position (1): Entry Delay
1 = 10 seconds
2 = 30 seconds
3 = 60 seconds
4 = 90 seconds
5 = 120 seconds
6 = 150 seconds
Digit Position (2): Exit Delay
1 = 10 seconds
2 = 30 seconds
3 = 60 seconds
4 = 90 seconds
5 = 120 seconds
6 = 150 seconds
Digit Position (3): Audible Time
1 = 2 minutes
2 = 5 minutes
3 = 10 minutes
4 = 15 minutes
5 = 30 minutes
Digit Position (4): Delay Before Dial Time
1 = 10 seconds
2 = 20 seconds
3 = 30 seconds
4 = 40 seconds
5 = 50 seconds
6 = 60 seconds
Digit Position (5): Disable Instant/Home Exit Delay
0 = No
1 = Yes: no exit delay when system is Instant, Home, or Instant/Home armed
Digit Position (6): Autohome Enable
0 = No
1 = Yes: interior zones automatically shunted when the system is armed and the exit door is not used
Command Location 1C: Loop Alarm Reporting Codes
1 C
1
2
3
4
5
6
(1) (2) (3) (4) (5) (6)
Default Values
PROGRAMMING CONVERSIONS
Hexadecimal Value
Key Strokes
A
B
C
D
E
F
0
1
2
3
4
5
Valid entries are 1 - F.
Zone number is automatically added as the second digit.
Program a "0" to disable Alarm Reports for this loop.
Digit Position (2): Loop 2 Alarm Report Code
Digit Position (3): Loop 3 Alarm Report Code
Digit Position (4): Loop 4 Alarm Report Code
Digit Position (5): Loop 5 Alarm Report Code
Digit Position (6): Loop 6 Alarm Report Code
See Digit Position (1) for programming information.
See Digit Position (1) for programming information.
See Digit Position (1) for programming information.
See Digit Position (1) for programming information.
See Digit Position (1) for programming information.
