9
System 236E Installation Instructions
To enter a Message or Label, use the [2] key to scroll through the
characters until you reach the desired character. If you scroll past
the desired character, the [8] key may be used to scroll back-
wards. When the desired character is displayed, press the [6]
key to move the cursor to the next character position. The [4] key
moves the cursor to the left. When all characters have been en-
tered, press the [#] key to write the message and move to the
next message position. Use the [0] key to move backward through
the messages.
The Scrolling order of the Alpha Plus messages is:
SERVICE MESSAGE
DEALER MESSAGE
SOFT ZONE IDENTIFIER (A, B, and C)
HARDWIRED LOOP IDENTIFIERS
KEYPAD ADDRESS
For example, to change the Keypad Address:
Enter Keypad programming, as described previously, then press
[*] [BYPASS]. This will step backwards one step to Keypad
Address. Enter the [New Address] followed by the [#] key.
ALPHA PLUS Programming Template
1
2
3
6
5
4
7
8
9
0
NOTE:
If you do not press any key for 5 minutes, the
keypad will automatically exit the programming mode.
To Exit Keypad Programming
When you have finished programming, press [*] [#].
The keypad
will also exit the programming mode if you do not press any
key within a five minute period.
