manualshive.com logo in svg

Calrec Apollo, Руководство оператора, Страница: 200 / 214

Поделиться
Скачать
Calrec Apollo Скачать руководство пользователя страница 200

System Status

200   APOLLO 

Digital Broadcast Production Console

SYSTEM STATUS

Apollo features System Status 
which reports warnings, faults and 
information to the user.

System status monitors all system 
components and connections.

System status notifications

Under normal operating circumstances, 
the system status notifications area to the 
far right of the menu bar at the bottom of 
the main application will show ‘Everything 
is OK’.

In the event that a message needs to 
be displayed, the notifications area will 
display the relevant colour depending on 
whether there is information, a warning or 
an error message to be viewed.  Touching 
this notification area will bring up the 
system status screen as shown in Fig 1.

Message types

Three types of message are reported by 
system status:

•  Information Messages - Inform the 

user when certain actions take place. 
They do not report errors, and no action 
needs to be taken to respond to them

•  Warning Messages - Indicate where 

the system has located a fault or 
failure, but will still operate without 
intervention from the user.  The 
message should be checked as 
the system may be running on its 
secondary components.

•  Error Messages - Report a serious 

error that could cause, or has caused 
the system to fail.  Normally requires 
user intervention to correct the problem 
before operation can continue.

The messages are reported in a list, as 
shown in Fig 1.  Each message in the 
list has an associated icon shown in the 
left column.  This identifies the type of 
message to the user.  Message types can 
be filtered using the buttons above the list.

Selecting a message in the list will update 
the MESSAGE DESCRIPTION area below 
to show the message in greater detail.

Status messages at different 
sample rates

Messages are produced for I/O boxes and 
Hydra2 Patchbays that are in the required 
list but are not at the same sample rate as 
the desk. 

Clearing messages

Information messages can be cleared 
by selecting them and then leaving the 
system status screen. 

Warning and Fatal Error messages can 
only be cleared by correcting the error 
and restoring the system to its normal 
operational state. 

Surface indication

In addition to the main application 
displaying a system status indicator when 
a message is created, the FAIL WARNING 
button on the broadcast facilities panel 
will also flash.  This is shown in Fig 2. 
Pressing this button when it is flashing 
will cause it to stop flashing and remain 
illuminated.  This will let the system know 
that the user has acknowledged the error 
but has not necessarily cleared it. 

External indication

It is also possible to set an external 
indicator to flash when an error message 
is reported.  The FAIL WARNING GPO 
function should be patched to the relevant 
GPO port to which the required indicator 
is connected. 

For a more detailed explanation of the 
GPIO functions of the system, see

   

“GPIO” on page 190.                                                               

FIG 1 - SYSTEM STATUS SCREEN

Содержание Apollo























































































































































































































Отзывы:

Нет отзывов