Calrec Apollo Скачать руководство пользователя страница 144 | Manualshive

Страница: 144 / 214

Calrec Apollo Скачать руководство пользователя страница 144

Monitoring

144 APOLLO

Digital Broadcast Production Console

FIG 7 - APFL SELECTION FOR MULTIPLE USERS

FIG 8 - APFL INDICATOR OPTIONS

Select ‘Misc Settings’ from the monitor
selector type menu at the bottom of the
TFT screen to bring up monitor options
and choose APFL 1, 2 or 3. Use the
control cell at the bottom left of the
monitor mode panel to switch between
Main Mon 1 and 2 and set their APFL
systems as required.

The ‘Flash APFL’ option for each APFL
system instructs the APFL indicator in
the broadcast facilities panel to flash or
to illuminate steadily when any AFL or
PFL is active in the relevant user section.
If the option is selected, the indicator will
flash. If it is deselected, the indicator will
illuminate steadily. This allows two APFL
systems on the same surface to have
separate indicators. See Fig 8.

The ‘Clear AFL’ and ‘Clear PFL’ buttons
clear AFL and PFL respectively for each
APFL system, unless the PFL has been
triggered by a GPI (see PFL via GPI below
for more information).

Note that if a path is moved to another
fader on the surface or to another
user split, the path’s AFL or PFL status
will move along with the path, feeding
the APFL system that has been set for
that user split.

Patch AFL, PFL and APFL buses

As well as injecting into the main monitors,
AFL, PFL and APFL systems are also
available to patch to output ports. APFL
systems are available in monitor source
lists, post their level controls and in meter
lists, pre their level controls.

PFL via GPI

PFLs can be remotely activated via GPI.
GPI PFL selections are input port or input
Alias based, firing the PFL of whichever
path the input is patched to.

See

“GPIO” on page 190

for details on

patching GPIs to surface functions.

If a channel’s PFL has been activated
via a GPI, the EXT light next to the fader
lights up green to indicate that control is
being applied externally.

It is not possible to deactivate a GPI PFL
from the desk, this can only be achieved
by deactivating the GPI Opto itself.

If the PFL is only activated via
GPI, the APFL clear button in the
Broadcast Facilities panel will not
light up.

In Monitor Mode, with MISC selected, as
shown above, there are ‘PFL from GPI’
enable buttons for each APFL bus.

These can be used to quickly regain
control of any channels which are set
to have their PFL activated via GPI. For
example for APFL 1, if a GPI has activated
a channel PFL and you wish to deactivate
the PFL from the control room, simply
touch ‘PFL 1 from GPI’. Note that until this
is reactivated the GPI PFL for all channels
using APFL system 1 will not work.

«
...
142
143
144
145
146
...
»

Содержание Apollo























































































































































































































Отзывы:

Нет отзывов