Calrec Apollo страница 211 Скачать руководство пользователя

Страница: 211 / 214

CALREC

Putting Sound in the Picture

211

• Changes to delay unit defaults can be

applied to all existing paths.

• H2O can select and overwrite patches

made by consoles.

• CSCP interface information is

displayed in the External Control
screen (main application).

• Source and Destination Protection

now covers channel input1/input2
switching.

V1.14.1

• Replay has been added to allow input 1

to input 2 switching for a definable set
of channels.

• Non-Motorised VCA Slave operation

has been added as a preference.

• Channel PFLs can now be activated

via GPI.

• Trim controls for inputs 1 and 2 can

now be linked per channel.

• Surface layouts can now be defined

and saved by the user on the fly.

• The range of available compressor

ratios has been increased.

• Each path’s Cut status is now indicated

on its output meter.

V.1.14.2

• More path properties can be copied

(Input, Fader, Downmix, Delay, Direct
Outputs) and it’s now possible to copy
between different path types.

• The oscillator can produce a tone

sweep and each leg of the oscillator
can be cut.

• H2O can control SRC, 48V and Gain

on Hydra 2 sources.

• The current sync source is visible at all

times in the main application footer.

• Group PFL and cut can be controlled

remotely through GPIs.

• A new meter scale is available with

markers and colour changes at -12 and
-18 dBFS.

• The direct output setup process has

been improved:
* Tapping an empty direct output

control now brings up the direct
output setup dialogue.

* The direct output feed can be

chosen during setup (Pre EQ, Pre
Fader, Post Fader, Mix Minus).

* The assigned path can be routed

to the mix minus bus in the direct
output setup dialogue.

• The Focus Area in Sends-Routes and

Outputs modes has been improved;
* The display of which send or output

is in focus is much clearer.

* Any adjustment to a send or output

will put it in focus.

* Minor updates to surface graphics

to improve clarity.

• Aliases can be created for Hydra2

Patchbays.

• Dual router cores can now be used as

slave routers.

• Support for MY5792 v2.08

V1.14.5

• CSCP override by fader touch
• Talkback to Misc. Monitors can be

configured to dim or cut the Main LS
output.

V1.14.6

• Each console core has a unique

MAC for each control processor card
allowing connection of several control
processor cores to a LAN.

V1.14.7

• Look ahead limiter on Main bus outputs

V1.14.8

• SNMP agent can be configured to

send System Status messaging to
multiple SNMP servers for redundancy.

V1.16

• Auto promotion of slave routers.

V1.16.1

• The new Dante modular I/O card is

now supported, providing an interface
between Dante and Hydra 2 networks.

• New COM express-based control

processors are now supported
for Artemis Light systems due to
obsolescence.

• Talkback to Misc Monitors can now be

inhibited either fully or in conjunction
with Mic Open systems.

• PFL overpress can now be disabled

from the main application.

• DPP Live and DPP non-Live settings

are now available for loudness meters.

V3.0 for New Concord Processors

• New Processing Mode for simplified

access to Eq, Dyn, Automixers,
Delay & AutoFaders.

• Refined Modes and Layers switching

for simplified navigation.

• Presets, which are snapshots of a

path’s parameter settings, can be
created, backed up and restored.

• New Wilds mode allows user to

configure custom controls within the
assign panels.

• Pre-v3.0 Wilds mode now known as

Strips

• Patching screen redesigned to show

connected destinations for each
source.

• New Path Based AutoFader system

with full control over delay duration and
level for fade in and fade out.

• Multi-layer interrogate: allows user to

see all contributing paths across layers.

• Spill controls can now access and

control stereo signal’s left and right
legs independently.

• Additional Meter Scales for more

regional requirements.

• Tone output available to output ports.
• EMBER control of input source

settings.

• GPO available for triggering playout

devices from fader open AND on.

• Mic/Line gain: display now shows

highest and lowest value if the gain is
not the same on all channel legs.

• Trim gain: display now shows highest

and lowest value if the gain is not the
same on all channel legs.

• New Waves Soundgrid modular I/O

card available providing an interface
between Waves Soundgrid Plug in
Server and Hydra 2.

• Allows creation of Input Aliases for

Hydra2 Patchbays.

• User Logging.

Содержание Apollo























































































































































































































Результаты поиска

Содержание Apollo

Отзывы:

Похожие инструкции для Apollo

Бренды по названию

Популярные бренды

Calrec Apollo, Руководство оператора

Результаты поиска

Содержание Apollo

Отзывы:

Похожие инструкции для Apollo

Бренды по названию

Популярные бренды