INSTRUCTIONAL MANUAL
2750L-P/4500L-P/6000L-P
August, 2001
Rev. K
-33-
3.5.2 DISPLAY
SCREENS
A display of data on the front panel LCD display is called a screen. There are five types of screens: menu, output
parameter, measurement, calibration and configuration screens.
Menu screens display the screen abbreviation with its equivalent number. The numeric value for each item in a menu
screen is the code that may be used to select the screen. Tables 3-5 through 3-8 show the numeric values for all
screens. Without the aid of the tables the MNU key may be used. The menu screens will display only the
programmable features that are enabled and their associated screen number.
Table 3-5 shows all of the available Output Parameter screens. While viewing any of the screens, the associated
output parameter may be changed from the keyboard.
Table 3-6 shows all of the Measurement screens. When accessing some Measurement screens up to three seconds
may be required to display the screen.
Table 3-7 shows all of the screens for calibrating the output and measurement functions. A special code is required to
access these screens. Refer to Section 4, Calibration.
Table 3-8 shows all of the Configuration screens. The only value that is user programmable is the IEEE-488 (GPIB)
Listen Address.
The following are for changing the output:
NO SCREEN
NAME
EXTENSIONS
ARGUMENT
ACTION TAKEN
1
SNC
INT, EXT
Selects phase A to be synchronized to an
external input.
*2
CLK
INT, EXT
Selects the external clock mode of operation.
*3
WVF
A, B, C
SNW, SQW
Sets the output waveform.
4
RNG
Range limit
Selects the output voltage range. Range limit
values of 135 and 270 are standard.
5
AMP
A, B, C
0-RNG limit
Sets the output voltage amplitude.
6
FRQ
45-5000
Sets the output frequency.
7 PHZ A,
B,
C, 0-±999.9
Sets the output phase angle.
8
CRL
A, B, C
0 to Max Current
Sets the output current limit
9
RMP A
DLY
0.001-9999
Sets the Delay between ramp steps in
seconds. Four decade resolution from 0.001 to
9999 seconds.
STP
Sets the step size of ramp parameter.
VAL
Sets the final value of the parameter ramped.
RMP B
STP
Same as RMPA
VAL
Same as RMPA
28
DRP
A,B,C
0 to 5
Drop periods of sine wave
*30
MOD
PHS1 or PHS3
Selects output to be 1 phase or 3 phase
*Optional screen.
NOTE:
RMPA and RMPB screens are not accessible until AMP, FRQ, CRL or PHZ are programmed (PRG)
but not yet entered (ENT).
Table 3-5
OUTPUT PARAMETER SCREEN
Содержание 12000L-1P
