INSTRUCTIONAL MANUAL
2750L-P/4500L-P/6000L-P
August, 2001
Rev. K
-32-
KEY
DESCRIPTION
SNW/0
Inputs the value "0" for all output parameters or to select screen "0" when followed by the ENT key.
Also used to select the sine wave waveform.
SQW/1
Inputs the value "1" for all output parameters or to select screen "1" when followed by the ENT key.
Also used to select the square wave waveform.
INT/2
Inputs the value "2" for all output parameters or to select screen "2" when followed by the ENT key.
Also used to select the Internal Synchronize or Internal Clock modes of operation.
EXT/3
Inputs the value "3" for all output parameters or to select screen "3" when followed by the ENT key.
Also used to select the External Synchronize or External Clock modes of operation.
4
Inputs the indicated numeric value for all output parameters or to
through
select the corresponding screen when followed by the ENT key
9
MNU/.
Selects the Menu screens that show all display screens and the corresponding numeric value. The
decimal point function of this key is enabled after any numeric key is depressed.
A
Used to direct any parameter change to phase A. Also used to update any quantity in the display
identified as A=.
B
Used to direct any parameter change to phase B. Also used to update any quantity in the display
identified as B=.
C
Used to direct any parameter change to phase C. Also used to update any quantity in the display
identified as C=.
↑
/REG
Used to increment the value in any output parameter screen or calibration screen. Also used to
load the program register into any register identified by the preceding numeric value.
↓
/REC
Used to decrement the value in any output parameter screen or calibration screen. Also used to
recall the program register identified by the preceding numeric value.
CLR/SRQ
Used to clear the numerical inputs for the display screen.
MON
Used to display programmed output parameter values. Used repeatedly, it will cause the display
screens of increasing numeric numbers to be displayed.
PRG
Used to program setup values in the Program Register. Used repeatedly, it will cause the display
screens of decreasing numeric numbers to be displayed.
ENT
Used to transfer the contents of the program register to the actual output parameters.
Table 3-4
KEYPAD KEY DESCRIPTION
Содержание 12000L-1P
