TOTAL LITE Revision 1
SERVICE MANUAL FOR INNOVATION
TOTAL LITE
Single-Cup Brewer
66
10.5 Main Board
Like all electronic main boards, they are very sensitive to power surges in the building. If this is your
reason for changing the main board and this persists, verify your power source. Use the necessary
precautions for handling static senistive devices.
Removing
1. Retrieve all your data;
2. Turn off the machine and unplug from the outlet;
3. Open the door and remove the lexan plate via the 4
screws;
4. Unplug the connections:
·
(Clockwise from the top left corner);
·
MDB Port
(if coinco)
·
Main board
: J11, J12, J18, J27, J2, J19, J3, J6, J16,
·
J24, J8, J22
5. Unscrew 4 plastic 1” posts;
6. Remove the board.
Replacing
1. Replace the board and fasten with the 4 posts;
2. Plug the connections and refer to the board diagram for
full size view;
3. Verify that all is in place, the board will fail if the
connections are reversed or in the wrong place;
4. Replace all parts in the reverse order;
5. Plug in the brewer and turn it on;
6. Verify on the screen that all is functioning.
All cables must be replaced in the correct order and direction before turning
the power on or the board will fail and be damaged.
Servicing Parts
