TOTAL LITE Revision 1
SERVICE MANUAL FOR INNOVATION
TOTAL LITE
Single-Cup Brewer
39
7.4.2 Adjusting the Tank Overflow Float
It is important to verify that the float is positioned appropriately in
the overflow cup since it can move around in transportation. If this
float is not in place the switch will not be activated and the unit will
automatically shut down sensing an overflow situation.
It is important to verify that the overflow cup is in place with the
highest side in the front and secured with the tape. If you need
to remove this cup, please make sure that you replace it with the
highest section facing the front and the overflow tube in the cup.
This will ensure that the float will “float” and will activate the overflow
switch if there is a problem.
7.5
3 Beans canister installation
7.5.1 Install the 3 Beans Canister
Unpack the 3 beans canister.
Remove the tape from transmission.
Install the canister on the shelf by aligning
the 3 transmissions of the canister with the
3 motors already fixed on the shelf.
Initial Setup
Transmissions
3 Beans canister
Motors
