TOTAL LITE Revision 1
SERVICE MANUAL FOR INNOVATION
TOTAL LITE
Single-Cup Brewer
52
8.7
Interior Parts Cleaning & Sanitizing
For sanitary reasons, do not use soap or detergent inside the brewer. Use hot water for on-site sanitation
or suitable chemical products in the shop. Wipping with towels or cloths can recontaminate sanitized
food-contact surfaces. Therefore, we recommend to air dry sanitized food-contact surfaces and not wipe
dry. Allow sufficient time for the parts to dry thoroughly before closing the door.
Use a medium size brush dedicated for coffee grounds and a small dust pan to easily brush away coffee
grounds and dust inside the brewer before cleaning with water.
Interior Parts to be cleaned
Canisters
Coffee brewer
Coffee funnel
Fan
Stainless coffee chute
3 Beans hopper plastic chute
8.7.1 Coffee Canisters
Removing canisters for cleaning
Frequency: Monthly or every 1,000 cycles
Coffee Bean Hopper
1. Unscrew and remove the plastic top fitting part behind the top cap;
2. Remove the top cap of the machine;
3. Unlock the 3 bean canister;
4. Remove the 3 bean canister;
5. Clean and sanitize under hot water and air dry completely;
6. Reinstall all parts in the reverse order.
7. Order a coffee to confirm that all parts or switches have
been replaced.
Caution! The rinse water is HOT. Be careful not to get any on you while
proceeding with the above steps.
Cleaning & Sanitizing
