TOTAL LITE Revision 1
SERVICE MANUAL FOR INNOVATION
TOTAL LITE
Single-Cup Brewer
25
6.6.2 Liquids and ingredients. tab
1. This line shows the recipe you are modifying.
2. This table is used to set the amount of coffee beans used to make coffee drinks.
3. These boxes are used to set the default coffee used the make the coffee drink.
4. This check box is used to set if the customer can choose the coffee he wants to make the coffee
drink.
5. This table is used to set the amount of water used to make coffee drinks.
6. This table is showing the operator what brew cycle is choosen automatically by the software
regarding the amount of water set on “coffee water qty” table above. See section 6.6.3 for more
information.
7. This table is used to set the amount of soluble powder used to make drinks.
8. This table is used to set the amount of water used to make drinks with soluble powder.
9. TO SAVE any parameters change press this button.
All values in the recipes are time values. A water level setting is an amount of time the dispensing
water valve is opened. An ingredient setting is is an amount of time the motor is running to dispense
coffee beans or soluble powder.
20 units = 1 second.
The box beside numeric keypad will show an estimated conversion of the value VS liquid amount or
value VS ingredient weight when you modify a setting.
2.
3.
8.
9.
5.
4.
6.
7.
1.
Service Software
