TOTAL LITE Revision 1
SERVICE MANUAL FOR INNOVATION
TOTAL LITE
Single-Cup Brewer
29
Service Software
6.7.2 System 2 tab
1. This is used to set the number of drinks ordered before someone gets one for free. To disable this
function, set it to 0. It is not recommended to use this feature if you are using an optionnal printer.
2. TO SAVE any parameters change press this button.
6.7.3 Tools tab
1. Pushing this button will open the touch screen utility screen. Only use the options and tools in
the “Tools” tab of the utility screen. ‘Draw Test’ Make a drawing on screen to test the accuracy of
the touch screen calibration. The touch screen is already calibrated during assembly. If you want to
do the calibration again, press the ‘clear parameter’ button and then ‘linearization’. Choose 9
points calibration. Press on all 9 circles one after the other.
2. After pushing this button the screen below will pop-up and you will be able to set time and date.
3. This button is used to see the coin acceptor status. Note: if there is no coin acceptor in the machine
or it is not plugged correctly, this box won’t be visible.
1.
2.
1.
2.
3.