Cadel RIVER IDROTECH 18 Скачать руководство пользователя страница 37

Страница: 37 / 48

RIVER IDROTECH 18 - 24 - 24H2O

PROBLEM

CAUSE

SOLUTION

INTERVENTION

The fire extinguish

and the stove stops

Empty hopper

Full the hopper.

Auger blocked by a

foreign object (for

example nails)

Clean the auger.

Bad quality pellets

Try other types of pellets.

Pellet drop value too

low "phase 1"

Adjust the pellet loading.

Check if on the

display there is an

"ACTIVE ALARM"

Have the stove checked.

The door does not

close perfectly or the

gaskets are worn

Check the door seal and replace the gaskets.

Ignition step is not

completed

Empty the brazier and repeat ignition.

Clogged exhaust

The exhaust chimney is partially or totally obstructed. Call a skilled

chimney technician to check from the stove exhaust to the chim-

neypot. Clean immediately.

Flames are weak and

orange coloured,

pellets do not burn

properly and the

glass blackens

Not sufficient com-

bustion air

Check as following: probable obstructions of the combustible air

inlet from the back or from the bottom of the stove; burning pot

obstructed holes with too ash remains. Have the fan blades and

auger cleaned. (see SMOKE RPM VARIATION User Manual)

Obstructed exhaust

The exhaust chimney is partially or totally obsturcted. Contact an

expert stove-repairer who checks the stove from the exhaust up to

the chimney pot. Provide immediately for stove cleaning.

Obstructed stove

Provide immediately at the inner cleaning of the stove.

The fume fan is out

of order

The pellets can burn also thanks to chimney flue depression

without the aid of the fume fan. Have the fume fan immediately

replaced. It can be noxious to health to let the stove running

without fume fan.

The exchanger fan

continues to turn

even though the

stove has just cooled

Faulty fume tempe-

rature probe

Replace the fume probe.

Faulty mother board Replace the mother board.

Содержание RIVER IDROTECH 18

















































Результаты поиска

Содержание RIVER IDROTECH 18

Отзывы:

Похожие инструкции для RIVER IDROTECH 18

Бренды по названию

Популярные бренды

Cadel RIVER IDROTECH 18, Руководство по установке

Результаты поиска

Содержание RIVER IDROTECH 18

Отзывы:

Похожие инструкции для RIVER IDROTECH 18

Бренды по названию

Популярные бренды