Cadel RIVER IDROTECH 18 Скачать руководство пользователя страница 17

Страница: 17 / 48

RIVER IDROTECH 18 - 24 - 24H2O

PLUMBING CONNECTION

7.1

PLUMBING SYSTEM CONNECTION

IMPORTANT!

If installation of the product involves interaction with another, pre-existing system complete with heating

equipment (gas boiler, methane boiler, diesel boiler, etc.), contact qualified personnel, who subsequently will

be responsible for conformity of the system in compliance with the applicable law in force.

The Company declines all responsibility for damage to persons or things in the event of failed or incorrect

operation, if the aforementioned warnings are not complied with.

IMPORTANT!

WE STRONGLY RECOMMEND WASHING THE ENTIRE SYSTEM BEFORE CONNECTING THE STOVE IN ORDER TO RE-

MOVE RESIDUE AND BUILD-UPS.

Always install gate valves upstream of the stove to isolate it from the hydraulic system should it be necessary

to move it for routine and/or special maintenance. Connect the stove using flexible hoses so as not to excessi-

vely bind the stove to the system and to allow it to be moved slightly.

The pressure discharge valve must always be connected to a water discharge pipe. The pipe must be suitable

to withstand the high water temperature and pressure.

7.2

CONNECTION DIAGRAM RIVER - IDROTECH 18 - 24 (SENZA DHW)

Fig. 34 - Connection diagram (senza DHW)

LEGEND

Fig. 34

3/4”M heating water delivery

3/4”M heating water return

System filling

System draining

B=150 - C=260

RIVER-IDROTECH

Содержание RIVER IDROTECH 18

















































Результаты поиска

Содержание RIVER IDROTECH 18

Отзывы:

Похожие инструкции для RIVER IDROTECH 18

Бренды по названию

Популярные бренды

Cadel RIVER IDROTECH 18, Руководство по установке

Результаты поиска

Содержание RIVER IDROTECH 18

Отзывы:

Похожие инструкции для RIVER IDROTECH 18

Бренды по названию

Популярные бренды