manualshive.com logo in svg

Cabletron Systems 9A600, Руководство по настройке, Страница: 81 / 158

Поделиться
Скачать
Cabletron Systems 9A600 Скачать руководство пользователя страница 81

9A656-04 and 9A600 Configuration Guide

2-53

Network Tools

2.24 NETWORK TOOLS

The Network Tools function resides on both the 9A656-04 and SmartSwitch 9500 chassis and 
allows the user to access and manage network devices.

Access the Network Tools screen by using the arrow keys to highlight the NETWORK 
TOOLS field in the Module Menu screen and pressing ENTER. The Network Tools screen 
displays. To see all the commands provided by the Network Tools utility, type help at the 
command prompt and press ENTER. The Network Tools help screen, 

Figure 2-28

, displays.

Figure 2-28

The Network Tools Help Screen

The Network Tools functions are performed using a series of commands. Entering commands 
in Network Tools involves typing the command to be executed at the Network Tools prompt, 
adding any desired or required extensions, and pressing ENTER.

NOTE

Some Network Tools commands, although executable, will not return any 
information because they do not apply to ATM technology.

Содержание 9A600































































































































































Отзывы:

Нет отзывов