manualshive.com logo in svg

Cabletron Systems 9A600, Руководство по настройке, Страница: 75 / 158

Поделиться
Скачать
Cabletron Systems 9A600 Скачать руководство пользователя страница 75

9A656-04 and 9A600 Configuration Guide

2-47

LAN Emulation Client Properties Screen

Actual ELAN Name (Read-Only)

This field displays the name of the ELAN to which this LEC belongs.

LEC State (Read-Only)

This field displays the current state of the LEC. The LEC goes through a series of initialization 
phases, which may result in this field displaying different states as the initialization process 
proceeds. The possible states are as follows:

•

initialState -

While in initialState the LEC receives two types of configuration 

parameters:

•

From the User: LECS ATM Address, ELAN Name, MTU Size, and LAN Type.

•

From the ATM Switch: The ATM Address of the switch.

•

lecsConnect -

During the lecsConnect phase, the LEC establishes a Configuration 

Direct VCC with the LECS.

•

configure -

The configure phase is where the LEC discovers the LES before going on to 

the join phase.

•

join -

During the join phase, the LEC establishes a Control Direct VCC with the LES. 

After this connection is made, the LEC is assigned a LEC ID Identifier, is assigned the 
name of the ELAN it will join, is notified of the maximum frame size allowed on the 
ELAN, and the LAN type that is being emulated (IEEE 802.3). The initialization process 
then proceeds to the initialRegistration phase.

•

initialRegistration -

The initialRegistration phase is used by the LEC to confirm that its 

MAC Address(es) are unique before becoming fully operational on the network. During 
this phase, the LEC may also register any additional unicast LAN destinations and Route 
Descriptors. 

•

busConnect -

While in the busConnect phase, the LEC connects to the Broadcast and 

Unknown server (BUS). At the end of this the phase, the LEC has a BUS Multicast Send 
VCC and a BUS Multicast Forward VCC with the BUS. Once these VCCs have been 
created, the LEC becomes operational on the network.

•

operational -

The LEC is now fully configured, and has joined the ELAN.

Admin State (Read-Only)

This field displays the current status of the LEC. This field will display “Active” if the LEC is 
operational or “NotInService” if the LEC has been stopped via management.

NOTE

In most cases, the initialization process occurs very rapidly, and the following 
initialization states, with the exception of “operational”, may not display.

Содержание 9A600































































































































































Отзывы:

Нет отзывов