Cabletron Systems 9A600 Скачать руководство пользователя страница 67

Страница: 67 / 158

9A656-04 and 9A600 Configuration Guide

2-39

Port Status Screen

ILMI State

This field indicates whether ILMI is currently operating on the interface. This field may
display the following items:

•

UP -

Indicates ILMI is operating on this interface

•

DOWN -

Indicates that ILMI is not operating on this interface

•

WSta (Wait for Start) -

Indicates that the 9A656-04 is waiting for ILMI to start on this

interface.

•

WSto (Wait for Stop) -

Indicates that 9A656-04 is waiting for ILMI to stop on this

interface.

•

DSta (Deferred Start) -

Indicates that the 9A656-04 is in the process of stopping ILMI

on this interface, but a request to start ILMI has been received.

•

DSto (Deferred Stop) -

Indicates that the 9A656-04 is in the process of starting ILMI on

this interface, but a request to stop ILMI has been received.

Stack Type

This field displays the type of Signalling stack this interface is currently supporting. This field
can display the following information:

•

UNI 3.0 N -

Indicates that the port is using UNI 3.0 Signalling. The “N” signifies that this

is a network side stack.

•

UNI 3.0 U -

Indicates that the port is using UNI 3.0 Signalling. The “U” indicates that this

is a user side stack.

•

UNI 3.1 N -

Indicates that the port is using UNI 3.1 Signalling. The “N” signifies that this

is a network side stack.

•

UNI 3.1 U -

Indicates that the port is using UNI 3.1 Signalling. The “U” indicates that this

is a user side stack.

•

UNI 4.0 N -

Indicates that the port is using UNI 4.0 Signalling. The “N” signifies that this

is a network side stack.

•

UNI 4.0 U -

Indicates that the port is using UNI 4.0 Signalling. The “U” indicates that this

is a user side stack.

•

PNNI 1.0 H -

Indicates that port is using for PNNI 1.0 for Signalling. The “H” signifies

that the PNNI Node ID for this interface is greater than (Higher) the adjacent Node ID.

NOTE

The ILMI State field will usually only display “UP” or “DOWN”. The following
definitions for the ILMI State field may display on rare occasions.

Содержание 9A600































































































































































Результаты поиска

Содержание 9A600

Отзывы:

Cabletron Systems 9A600, Руководство по настройке, Страница: 67 / 158

Результаты поиска

Содержание 9A600

Отзывы: