manualshive.com logo in svg

Cabletron Systems 9A600, Руководство по настройке, Страница: 108 / 158

Поделиться
Скачать
Cabletron Systems 9A600 Скачать руководство пользователя страница 108

Chapter 3: ILMI 4.0 and the SmartSwitch 9500 System

3-4

9A656-04 and 9A600 Configuration Guide

Example 3

In this example, the ANIM installed in slot 3 of the 9A656-04 is an ANIM-22/4. This ANIM 
provides 4 OC-3 (155 Mbps) switched ports that use Category 5 UTP cabling. This ANIM is 
used to connect 4 servers to the ATM backbone. Each Server has their own ATM NIC Card 
that are connected to ports 1 through 4 of the ANIM-22/4. Each Server, however, have NIC 
cards of various ages that support different versions of UNI Signalling. The Servers connected 
to ports 1 and 4 can support UNI 3.0 or 3.1, therefore the devices have auto-negotiated to use 
the highest level of UNI possible (3.1). The Server connected to port 2 can only support UNI 
3.0, so the Signalling stack has automatically been set to this level. The Server connected to 
port 3 has the newest NIC card and can support UNI 3.0, 3.1, or 4.0. The devices have 
auto-negotiated to use the highest version supported (4.0). The Servers are ATM end-user 
devices, therefore they maintain the User side of the Signalling stack, while the 9A656-04 
supports the Network side.

Example 4

In this example, the ANIM installed in slot 4 of the 9A656-04 is an ANIM-31/2. This ANIM 
provides 2 OC-12 (622 Mbps) switched ports that use multimode fiber optic cabling. Port 1 of 
the ANIM-31/2 is used to connect to a second SmartSwitch 9500 system (direct connection to 
another 9A656-04). Port 2 of this ANIM is used to connect to a third SmartSwitch 9500 
system. All three SmartSwitch 9500s are using PNNI 1.0 for Signalling. The three 
SmartSwitch 9500s have kept their default PNNI settings (as described in 

Section 2.15

 of 

Chapter 2

). With the default PNNI settings, all three SmartSwitch 9500s automatically belong 

to the same PNNI peer group.

NOTE

By default, all SmartSwitch 9500s that are physically connected use PNNI 1.0 for 
Signalling. This includes all front panel connections to other SmartSwitch 9500s, 
and all CTM backplane connections between 9A656-04s installed in the same 
chassis.

The (H) and (L) in Example 4 of 

Figure 3-1

 indicated whether the node ID of each 

SmartSwitch 9500 is (in a bitwise comparison) greater than(Higher) or less than 
(Lower) than the adjacent PNNI Node. 

Содержание 9A600































































































































































Отзывы:

Нет отзывов