Cabletron Systems 9A600 Скачать руководство пользователя страница 31

Страница: 31 / 158

9A656-04 and 9A600 Configuration Guide

2-3

Navigating Local Management Screens

2.1.1

Selecting Local Management Menu Screen Items

Select items on a menu screen by performing the following steps:

Use the arrow keys to highlight a menu item.

Press ENTER. The selected Local Management screen displays.

2.1.2

Exiting Local Management Screens

There are two ways to exit Local Management (LM).

Using the EXIT Command

To exit an LM screen using the EXIT command, proceed as follows:

Use the arrow keys to highlight the EXIT command at the bottom of the Local
Management screen.

Press ENTER. The Password screen displays and the session ends.

Using the RETURN Command

Use the arrow keys to highlight the RETURN command at the bottom of the Local
Management screen.

Press ENTER. The previous screen in the Local Management hierarchy displays.

Exit from Local Management by repeating steps 1 or 2 until the Main Menu screen
displays.

Use the arrow keys to highlight the RETURN command at the bottom of the Main Menu
screen.

Press ENTER. The Password screen displays and the session ends.

NOTE

The user can also exit Local Management screens by pressing ESC twice. This exit
method does not warn about unsaved changes and all unsaved changes will be
lost.

Содержание 9A600































































































































































Результаты поиска

Содержание 9A600

Отзывы:

Cabletron Systems 9A600, Руководство по настройке, Страница: 31 / 158

Результаты поиска

Содержание 9A600

Отзывы: