manualshive.com logo in svg

Cabletron Systems 9A600, Руководство по настройке, Страница: 23 / 158

Поделиться
Скачать
Cabletron Systems 9A600 Скачать руководство пользователя страница 23

9A656-04 and 9A600 Configuration Guide

1-11

Configurable Options

Environmental Module Configuration

Local Management provides access to the Environmental Module screen. This screen allows 
the user to view current operating conditions of the Environmental Module (EM), configure 
the COM ports of the EM, and download a new firmware image for the EM to FLASH 
memory.

ILMI Configuration

The ILMI Configuration screen allows the user to set the minimum value for Virtual Channel 
identifiers (VCIs) for front panel and backplane Switched Virtual Connections (SVCs), the 
maximum value for Virtual Path Identifiers (VPIs) for SVCs, and the maximum value for 
Virtual Path Identifiers (VPIs) for Switched Virtual Path Connections (SVPCs) for the entire 
system (SmartSwitch 9500 chassis).

PNNI Configuration

The PNNI Configuration screen allows the user to set the NSAP prefix and PNNI level of the 
SmartSwitch 9500 chassis. When these settings are saved, each 9A656-04 installed in the 
chassis share the same NSAP prefix, and the same PNNI level. 

ATM Diagnostics

The SmartSwitch 9500 chassis can be set to run ATM diagnostics when power is cycled or the 
modules are reset. All major hardware subsystems of the system are tested during the power 
up diagnostics.

Содержание 9A600































































































































































Отзывы:

Нет отзывов