Cabletron Systems 9A600, Руководство по настройке, Страница: 25 / 158

9A656-04 and 9A600 Configuration Guide 1-13
Local Management Screen Elements
Table 1-4 describes the most common event messages. Event messages related to specific
Local Management applications are described with those applications throughout this manual.
Display Fields
Display fields cannot be edited. These fields may display information that never changes, or
information that may change as a result of Local Management operations, user selections and
configurations, or network monitoring information. In the screens shown in this guide, the
characters in the display fields are in plain type (not bold). In the field description, the field is
identified as being “read-only”.
Input Fields
Input Fields require the entry of keyboard characters. IP addresses, subnet mask, default
gateway and device time are examples of input fields. In the screens shown in this guide, the
characters in the input fields are in bold type. In the field description, the field is identified as
being “modifiable”.
Selection/Toggle Fields
Selection/Toggle fields provide a series of possible values. Only applicable values appear in a
selection field. In the screens shown in this guide, the selection displays within brackets and in
bold type. In the field description, the field is identified as being either “selectable” when there
are more than two possible values, or “toggle” when there are only two possible values.
Command Fields
Command fields are located at the bottom of Local Management screens. Command fields are
used to exit Local Management screens, save Local Management entries, or navigate to
another display of the same screen. In the screens shown in this guide, the characters in this
field are all upper case and in bold type. In the field description, the field is identified as being
a “command” field.
NOTE
Only the password, configuration and status screens have event message fields.
Table 1-4 Event Messages
Message What it Means
SAVED OK One or more fields were
modified, and saved to NVRAM.
NOT SAVED--PRESS SAVE TO
KEEP CHANGES Attempting to exit the LM screen
after one or more fields were
modified, but not saved to
NVRAM.
NOTHING TO SAVE The SAVE command was
executed, but nothing was saved
to NVRAM.