manualshive.com logo in svg

Cabletron Systems 9A600, Руководство по настройке, Страница: 62 / 158

Поделиться
Скачать
Cabletron Systems 9A600 Скачать руководство пользователя страница 62

Chapter 2: Basic System Configuration

2-34

9A656-04 and 9A600 Configuration Guide

Figure 2-19

ILMI Configuration Menu Screen

2.16.1 ILMI Configuration Menu Screen Fields

The following section provides definitions of each field of the ILMI Configuration Menu 
screen.

MIN SVCC VCI

This field is used to set the minimum value that ILMI will use to assign VCIs to SVCs. This 
field has a range from 33 to 16383. The default setting for this field is 33. This setting, 
combined with the default setting of the MAX SVCC VPI field, makes the SmartSwitch 9500 
a SVC only switch. 

MAX SVCC VPI

This field is used to set the maximum value that ILMI will use to assign VPIs to SVCs. This 
field has a range from 0 to 4095. The default setting for this field is 4095. This setting, 
combined with the default setting of the MIN SVCC VCI field, makes the SmartSwitch 9500 a 
SVC only switch

MAX SVPC VPI

This field is used to set the maximum value that ILMI will use to assign VPIs to SVPCs. This 
field has a range from 0 to 4095. The default setting for this field is 4095.

Содержание 9A600































































































































































Отзывы:

Нет отзывов