Cabletron Systems 9A600 Скачать руководство пользователя страница 63

Страница: 63 / 158

9A656-04 and 9A600 Configuration Guide

2-35

The ILMI Configuration Menu Screen

2.16.2 Setting the MIN SVCC VCI Field

To set the minimum value that the SmartSwitch 9500 will use for VCIs on SVCs, proceed as
follows:

Use the arrow keys to highlight the MIN SVCC VCI field.

Enter a value between 33 and 16383 and press ENTER.

Use the arrow keys to highlight the SAVE command at the bottom of the screen.

Press ENTER. The minimum VCI value becomes operational.

2.16.3 Setting the MAX SVCC VPI Field

To set the maximum value that the SmartSwitch 9500 will use for VPIs on SVCs, proceed as
follows:

Use the arrow keys to highlight the MAX SVCC VCI field.

Enter a value between 0 and 4095 and press ENTER.

Use the arrow keys to highlight the SAVE command at the bottom of the screen.

Press ENTER, the new maximum VPI value becomes operational.

2.16.4 Setting the MAX SVPC VPI Field

To set the maximum value that the SmartSwitch 9500 will use for VPIs on SVPCs, proceed as
follows:

Use the arrow keys to highlight the MAX SVPC VCI field.

Enter a value between 0 and 4095 and press ENTER.

Use the arrow keys to highlight the SAVE command at the bottom of the screen.

Press ENTER, the new maximum VPI value becomes operational.

CAUTION

Section 2.16.2

through

Section 2.16.4

provide instructions on changing settings

that may cause network problems if not configured correctly. Refer to

Chapter 3

you are unfamiliar with ILMI, and how it relates to the SmartSwitch 9500 system,
before performing any of these functions.

All current connections on the SmartSwitch 9500 will be dropped upon changing
and saving any settings in the following sections

Содержание 9A600































































































































































Результаты поиска

Содержание 9A600

Отзывы:

Cabletron Systems 9A600, Руководство по настройке, Страница: 63 / 158

Результаты поиска

Содержание 9A600

Отзывы: