manualshive.com logo in svg

Cabletron Systems 9A600, Руководство по настройке, Страница: 20 / 158

Поделиться
Скачать
Cabletron Systems 9A600 Скачать руководство пользователя страница 20

Chapter 1: Introduction

1-8

9A656-04 and 9A600 Configuration Guide

2.

The 9A656-04 activates ILMI 4.0, which allows auto configuration. This makes the 
9A656-04 capable of using any version of ILMI (3.0, 3.1, or 4.0) that a User, other ATM 
switch, or ATM Access device may be using when communicating with the system. Each 
interface will become a UNI, IISP or PNNI connection automatically.

3.

The 9A656-04 runs the LEC election algorithm. If this module is elected it creates a LAN 
Emulation Client (LEC) that is used for management purposes. This LEC then goes 
through the following substeps:

a.

The 9A656-04 attempts to detect LANE services. It will continue to perform this task 
every ten seconds until it receives a response.

b.

The 9A656-04 attempts to establish a connection with the well-known LAN Emulation 
Configuration Server (LECS).

c.

Once a connection is established with the LECS, the 9A656-04 joins the default ELAN. 
If management functions are performed via a different ELAN, Local Management 
allows the user to specify the ELAN to which the LEC will belong.

4.

If there are multiple 9A656-04s in the chassis, an election process occurs where one of the 
modules is elected to handle all management requests to the SmartSwitch 9500 chassis.

5.

The 9A656-04 begins switching traffic. Connections and their bandwidth requirements are 
accepted on a first come, first served basis.

Содержание 9A600































































































































































Отзывы:

Нет отзывов