Chapter 1 General Descriptions
BECS-528 Computerized Embroidery Machine's Manual
5
9.
Cyclic Embroidery
When the machine activates the cyclic embroidery function, the machine can return to
the origin automatically after completing the pattern for each time. Along with the special
pattern-designing or repetition embroidery, user can increase embroidery productivity by large
margin.
10.
Batch Embroidery (Combination Pattern)
User can combine several identical or different patterns with the different scaling rate,
rotating angle, pattern direction and relating displacement into one “combination pattern”
which contains parameters and several single shapes. The combination pattern is attached with
the extension name of PAR. User can realize the batch embroidery by embroidering this
pattern.
11.
Compiling Pattern
A.
Compiling Current Pattern
Compile the selected pattern according to the set scale rate, rotating angle and repetition
to create a new pattern in the memory. This new pattern can be used for embroidery,
outputting and other operations.
B.
Compiling the Combined Design
The system can compile the combined design to create a new pattern into the memory,
which can also be used for embroidery, outputting and other operations.
12.
Edition Function
User can edit the pattern within the memory by every stitch (exclude the combination
pattern), which is easy for user to make the partial modification.
13.
Appliqué Embroidery
This function can set a patch code at the color-changing code or stop code. And when the
machine embroiders the appliqué code, it will halt and move frame out for appliqué (it is based
on the setting of offset origin). After patching cloth, user could pull the operation bar to let the
frame move back and continue embroidering.
14.
Memory of Pattern Start Point
This function can save the start point of each pattern, so that user needn’t move the frame
to search the origin at embroidering the same pattern for each time.
