Appendix
Ⅳ
Network Connection of Embroidery
Machines
BECS-528 Computerized Embroidery Machine's Manual
121
(1)
PC and embroidery machine linked by HUB
In this situation straight-through cable is used to link PC with HUB.
(2)
Connect the two networks in
“
2
”
through HUB
6.
Setting the network parameters of embroidery machine
(2)
MAC address of embroidery machine
Set MAC address of NIC of embroidery machine. Each embroidery machine has its
sole address. The range of this parameter is 000000000000~00FFFFFFFFFF.
(3)
IP address of server
This parameter has to be the IP address of the PC installed with EmbNetServer. This
address can be found in the display window of EmbNetServer.
EmbNetServer installation and use refer to the CD information with embroidery machine.
(4)
Server port No.
This parameter value is the port number used by EmbNetServer. The number can be
found in the display window of EmbNetServer.
(5)
IP address of embroidery machine
Set the IP address of embroidery machine when it’s linked with PC. The IP addresses
of embroidery machines can’t be repeated. In one sub network the network numbers of
embroidery machines and PCs have to be the same. And their computer numbers have to be
different.
(6)
Subnet mask
Set the subnet mask of IP address of embroidery machine when it’s linked with PC. In
one sub network the subnet masks of embroidery machines and PCs have to be the same.