Chapter 9 Assistant Operation and Setting the Parameters
38
BECS-528 Computerized Embroidery Machine's Manual
(1) Check the boundary of a design
After selecting pattern but before the embroidery, user can check the peripheral range of
the pattern (The system will display the boundary data of the pattern, which are the 4
coordinates from the pattern start point to the max outline).
(2) Move the frame along the boundary of a design
After user selects the pattern before embroidery, the frame will run a cycle along the
outline of pattern for checking whether it exceeds the limits.
(3) Create design from outline
This operation can be carried out after user selects the pattern before the embroidery,
which can produce a peripheral pattern of the current pattern. The peripheral pattern can be
embroidered individually.
User can achieve the outline of this pattern by embroidering the peripheral pattern. And
the peripheral pattern has a central “+” line, if the length of the central “+” line is insufficient,
the No. 99 pattern can be used for supplementary embroidery. The pattern No.99 is the
reserved pattern which is a pattern of horizontal line. This is very convenient for embroidering
the outline of pattern.
(4) Frame to generate design, then embroider back
Operation: move the frame along the assigned paths from the current position, when meet
a inflexion, press "
" key to confirm the line path; then move the frame to other positions
and press “
” to finish the several linear paths. If the entire linear paths are inputted, user
can press “
” to quit to the main interface. Finally, user can pull the bar directly to start