Chapter 9 Assistant Operation and Setting the Parameters
BECS-528 Computerized Embroidery Machine's Manual
37
Use digital key, "
" and "
" keys to input data. The frequency of Y repetition
presents the number of longitudinal repetition, i.e. the frequency of repetitive embroidery in a
row.
9) X Interval (unit: mm)
Use digital key, "
", "
" , “
”and "
" keys to input data.
X Interval presents the distance between the starting points of two adjacent patterns in
transverse direction during repetition (accuracy: 0.1mm). “+” is to move frame to left while “-”
is to move frame to right.
10) Y Interval(unit: mm)
Use digital key, "
", "
" , “
”and "
" keys to input data.
Y interval presents the distance between the starting points of two adjacent patterns in
longitudinal direction during repetition (accuracy: 0.1mm). “+” is to move frame to front side
while “-” is to move frame to back side.
11) Priority modes (scale priority or rotation priority)
Use "
", "
" and "
" keys to perform the inputting. When the X scale ratio
is different to Y scale ratio, and the pattern has the rotating angle, the scale priority and rotation
priority can create different embroidery results.
(4)
Press "
" to quit this operation.
(5)
Press "
" to quit “Other Management” interface.
9-2 Frame
to
Point
For details, please read the concerned part in Chapter 4.
9-3 Operations of Pattern Periphery
Operation:
1. Press "
" key to enter the Other Management Interface:
2. Move the icon to "DESIGN RANGE'S OPERATIONS", and press "
" key
3. According to the prompt, press "
", "
" and "
" keys to complete the
following operations: