Chapter 9 Assistant Operation and Setting the Parameters
40
BECS-528 Computerized Embroidery Machine's Manual
9-4 Setting the Offset Point (under Embroidery Confirmation Status)
Offset point can be a random point beyond the starting point, as shown in the following
figure:
a: offset point
b
b: start point
a
When you select a pattern and enter the embroidery confirmation status, the system will
clear the offset point set in the previous time. Therefore, the correct usage of the offset point is
as following:
(1)
Select a pattern for embroidering and make the machine enter the embroidery
confirmation status. (Refer to Section 3-4)
(2)
Press "
", "
", "
" and "
" to move the frame to the starting point of
pattern.
(3)
Press "
" key to activate the interface of Other Management :
(4)
Press move the icon to "Setting Another Start", and then press "
" key.
(5)
Press "
", "
", "
" and "
" to move the frame to the offset point.
