Butterfly BECS-528 Скачать руководство пользователя

Страница: 20 / 130

Chapter 3 How to Start Embroidery

BECS-528 Computerized Embroidery Machine's Manual

Point 2: If the current pattern has the start point, user can take the operation for restore the

origin of pattern, which is to move the frame to the saved position of pattern origin.

Point 3: We suggest you do as the following sequence if you want to use the function of

saving and restoring the pattern’s origin point: Firstly, select one pattern; secondly, move the

frame to find the pattern’s origin point, and at last, confirm the embroidery and save the

pattern’s origin point according to the prompt.

Point 4: The pattern’s origin point that has been found by moving the frame after

embroidery confirmation will not be saved.

Point 5: If the pattern’s origin point has been saved, it can be used along with the power

resume function. When power is off and the frame has been moved, and when the pattern’s

origin point is available (if not available, set the machine’s zero point again and ensure that it is

same as before), user needs to release embroidery confirmation status, select the same pattern

and recover the pattern’s origin point. After that user can confirm the embroidery and do

high-speed idling to the stop point, and finally continue the embroidery.

Explanations about saving the embroidery parameters.

When user confirms the embroidery, the machine can save pattern parameters for later

usage. The parameters are: design direction, angle of rotation, X scale, Y scale, priority mode,

repetition mode, repetition order, frequency of X repetition, frequency of Y repetition, X

repetition distance, Y repetition distance and color-changing sequence (Note: only the

parameters for the first 100 patterns can be stored/recovered).

If the design parameters of a pattern have been saved, the system will automatically

recover its parameters when user selects this pattern for embroidery.

This function is very applicable when user embroiders the same pattern repetitiously

without changing the parameters, so that it can reduce the times of inputting parameters and the

operation mistakes.

Select a pattern for embroidery

Operation:

(1)

Press "

" key (in embroidery preparation mode) to enter the interface for pattern

management:

(2)

The icon is at "Embroidery Design.", and press "

" key.

Содержание BECS-528



































































































































Результаты поиска

Содержание BECS-528

Отзывы:

Похожие инструкции для BECS-528

Бренды по названию

Популярные бренды

Butterfly BECS-528, Руководство пользователя

Результаты поиска

Содержание BECS-528

Отзывы:

Похожие инструкции для BECS-528

Бренды по названию

Популярные бренды