Busch-Jaeger Busch-SmartTouch ST/A10.11-811, Руководство по эксплуатации продукта

Страница: 206 / 364

KNX control elements and application parameters
Application "Fault and alarm messages" - Settings of the individual messages
Product manual 2CKA001473B5342 │ 206
10.18.4 Automatic archiving at an acknowledgement
Options: Deactivated
Activated
The parameter is used to specify that after acknowledgement in the application page the
message is archived immediately and is no longer displayed in the alarm list.
–
Deactivated
: No automatic archiving after acknowledgement. The following supplementary
parameter is available:
Automatic archiving as soon as the alarm is no longer active .
Options: Deactivated
Activated
–
Deactivated
: No automatic archiving when the alarm is no longer active.
–
Activated
: The message is archived and displayed as soon as the alarm is no longer
active.
–
Activated
: The message is archived in the application page automatically after the
acknowledgement.
10.18.5 Sound for alarm
Options: Setting option from 1 - 5
The parameter is used to specify which signal tone is to be played during the display of the
message. Five different signal tones are available for selection.
10.18.6 Sound for Notice
Options: Setting option from 1 - 5
The parameter is used to specify which signal tone is to be played during the display of the
message. Five different signal tones are available for selection.
10.18.7 Signal tone for error
Options: Setting option from 1 - 5
The parameter is used to specify which signal tone is to be played during the display of the
message. Five different signal tones are available for selection.
10.18.8 Default setting for signal tone volume [%]
Options: Setting option from 10 - 100
The volume of the signal tones is preset in percent via the parameter.
10.19 Application "Fault and alarm messages" - Settings of the individual messages
10.19.1 Name of message
Options: <Name>